Feature
1. Easy control system and the beginner can operate it.
2. Bends rebar up to 25mm (1inch), up to 180 degrees diameter in seconds.
3. Fast and easy change of angles with two control knobs attached to preset the bending angles.
(Angles controllable from up to 180 degrees)
4. Use of electromagnetic clutch for the motor maintaining a certain amount of power.
5. Foot switch provides the operator the ability to free up hands for safe material handing.
Specifications
Model |
JMB-25 |
Max. bending Dia. [mm] |
25 (SD400) |
Motor |
2.2kW / 3hp |
Electrics |
220V 50/60Hz, Single Phase |
Bending Angle |
0-180 degrees / 6sec |
Dimension L x W x H [mm] |
485 x 465 x 470 |
Weight [kg] |
102 |
- Dual angle adjustment device.
- Easy change of angles with two control knobs
- Two different angles preset save man hours by
uniformly bending rebar.
- Two start buttons for preseted degree
- Two connectors for foot switch
- Suitable for small and middle construction sites